Heavy fret wear on a Martin that is well past leveling. I'll pull these frets and prep the board for new frets.
Viewing entries in
repair
An output jack repair on an early 80's Flying V. I used the same technique (and jig) on a Yamaha Hollowbody that I wrote up over on the blog last year.
http://www.chubbuckguitars.com/blog/2014/07/29/output-jack-crack
Video with a trippy intro of the repair from the vlog:
This pickup hasn't worked in years and the player decided to let me give it a shot. I got lucky on this one. First thing to check on acoustic pickup issues is the power. A fresh battery didn't solve the issue so I started checking connections with a multimeter set to continuity (beeps when a connection is good). The culprit turned out to be the battery box. All of the connections were good, but their wasn't enough pressure to hold the battery leads up against the contacts in the battery tray. I used some foam to take up the slack and push the battery forward in the tray and voila!
After resolving the pickup issue, here's a quick string-up from the vlog:
A quick and dirty setup on a new Mitchell. This has an undersaddle pickup so anytime you make a change to the saddle height, you need to check the string-to-string balance.
A custom shop 2012 Gibson ES-359 in for a fret level and an odd top crack. This is the main guitar for Caton Sollenberger of The Jauntee. He is heading out on the road starting from Worcester, MA at the end of the month. The band will be kicking off their fall east coast southern tour.
The final setup video from the vlog: