Lifting bridge :: Bedell TB-30-G [5.0 lbs]

View fullsize

Lifting bridge :: Bedell TB-30-G [5.0 lbs]

The bridge was peeling away from the top, so it was removed, refit and re-glued with hot hide glue.  A small back crack running from the neck block to the first brace was also repaired.

Bridge re-glue :: Bedell TB-28-G

View fullsize

Bridge re-glue :: Bedell TB-28-G

This bridge was lifting so it was removed, refit and re-glued.  Before re-gluing, the area around the bridge was wet sanded and buffed to remove some super glue remnants from a previous repair attempt.  Next up will be finishing up a back crack repair (coming off the corner of the neck block) and it should be ready to head back out.

Failing bridge :: Bedell TB-28-G

View fullsize

Failing bridge :: Bedell TB-28-G

Here's a bridge that should be fairly easy to remove.  Just need to break the remaining bond, clean, fit and re-glue.  I was told that some superglue was used at one point so it should be interesting once the bridge is pulled.

View fullsize