Neck carve & rewire :: 2014 JW Van Tele [9.1 lbs]
A custom tele in for a replacement 6-way "Freeway Switch" and rewire, add master volume and neck recarve. Mmmm ... P90's ...
![Neck carve & rewire :: 2014 JW Van Tele [9.1 lbs]](https://images.squarespace-cdn.com/content/v1/53dfcee2e4b0c0da377c65c7/1436202957780-9IOK8VZTVHW6SJ05IUGK/image-asset.jpeg)
Viewing entries tagged
neck recarve
Neck recarve :: 2014 JW Van Tele
I've carved another neck for this player and he knows what he likes. This neck was much too thick for him (~0.960") so it was carved down to his spec's and refinished with tung oil for a satin feel.
2009 Fender Tele American Special / Warmoth [8.1 lbs] :: neck carve and setup.
The neck is a Warmoth birdseye maple '59 carve that was thinned a bit and refinished with tung oil (wiping varnish). Frets 12 and up were leveled and the neck set angle adjusted for the Mastery bridge. The 3-way switch was intermittent so the contacts were cleaned as well.
Fender Tele body / Warmoth neck :: neck carve.
I'm thinning this Warmoth '59 carve down a bit for a player and refinishing it with Tung oil (wiping varnish).
2008 Sadowsky Modern 24 MM [7.2 lbs] :: bass neck re-carve.
I have re-carved another Sadowsky J neck for this player and he prefers a thinner neck and super low action. Both necks were refinished with a “Tung Oil Finish” that is really a wiping varnish as it has a resin mixed in with the oil to speed up drying. This is a super easy, very tactile finish on a maple neck.
This bass was in recently for a setup: [photo]
Here is the Sadowsky J when it was in the shop: [photo]