Viewing entries tagged
finish touchup

Neck reset final fit :: 1969 Guild Mark III

Comment

Neck reset final fit :: 1969 Guild Mark III

Neck reset final fit :: 1969 Guild Mark III

Whew! Guild neck resets are always a little more involved but this guy is just about ready to glue up. Guilds use a shallow dovetail angle so the fit is more critical than others. Time to buff out the finish repairs around the joint, glue, clamp and drink a beer.

Comment

Fingerboard extension top crack splint :: 2007 Pavan TP-30 [3.9 lbs]

Comment

Fingerboard extension top crack splint :: 2007 Pavan TP-30 [3.9 lbs]

Fingerboard extension top crack splint :: 2007 Pavan TP-30 [3.9 lbs]

This classical has a nasty crack in the top that runs along the bass side of the fingerboard clean into the sound hole.  The crack had loosened the fingerboard brace so that was addressed first.  Two cleats were then fit and glued to support the break (one along the fingerboard, one just inside the sound hole).  This crack was far too open to just glue up (even with humidifying), so a thin spruce splint was fit, glued and trimmed into the crack with a minor color touch up to better match the top.

Comment