Pre-refret fingerboard level :: 1967 Guild Starfire IV
This late '60s Guild 335-style guitar is in the neck jig being prepped for new frets. Note that the kitty litter is still in there ...
Check the tags below for the other guitars in this photo
Chubbuck Guitars / Kevin Chubbuck, making & repairing guitars in an old building just north of Boston, Massachusetts.
Viewing entries tagged
dc-16rgte
Pre-refret fingerboard level :: 1967 Guild Starfire IV
This late '60s Guild 335-style guitar is in the neck jig being prepped for new frets. Note that the kitty litter is still in there ...
Check the tags below for the other guitars in this photo
2005 Martin DC-16RGTE :: resecure pickup elements and set up.
The output jack was falling out of the guitar as the nut inside had worked it’s way loose. It was tightened and the cabling was resecured to the side so as to not rattle around inside the guitar.
The frets are severely worn, yet the guitar plays fairly clean with low action. The guitar suffers from numerous low-humidity cracks along both the top and back seams. The top seam running from the bridge to the tail block is completely open to the extent that a Post-It can be easily inserted. I recommended that this top crack be be a priority and repaired as soon as the player’s budget will allow as it will eventually cause other complications.